GOST R 57360-2016 / EN 13791: 2007
Prefabricated reinforced concrete constructions. Determination of compression strength of concrete
Section: State standards (GOST)
Document: GOST R 57360-2016 / EN 13791: 2007
GOST R 57360-2016 contains:
- methods and procedures for assessing the compressive strength of concrete in structures and prefabricated structural members;
- principles and guidelines for establishing the relationship between test results when using indirect test methods and the compressive strength of core drilled from concrete in a structure;
- guidance for assessing the compressive strength of concrete in building structures and prefabricated elements by means of indirect or combined test methods.
GOST R 57360-2016 does not apply in the following cases:
- if an indirect test method is used that does not correlate with the compressive strength of drilled cores;
- evaluations based on tests of drilled cores with a diameter of less than 50 mm;
- estimates based on tests of fewer than three drilled cores;
- application of micro-cores.
In these cases, the national regulations applicable to the construction site must be observed.
It is not intended to assess the conformity of the compressive strength of concrete to the requirements of EN 206-1 or EN 13369, unless required by EN 206-1:2000, clause 5.5.1.2, or 8.4 of this standard.
Key words: prefabricated reinforced concrete structures, prefabricated elements, concrete compressive strength, drilled core, testing, assessment of concrete compressive strength.
Compliance with areas of accreditation
Included in the scope of accreditation
Destructive & Other Types of Tests:
Download:
Доступ к документу запрещен
Просмотр и скачивание документа разрешено только зарегистрированным посетителям.