Retail | checkout at the office; |
Online Starter* | entry level benefits; |
Online 1..5* | five steps: more orders - more benefits; |
Online Wholesale* | maximum benefit; |
Online VIP* | individual discount. |
* valid only for orders placed on the site, according to the standard templates of contracts and accounts, it is mandatory to accept the Confidentiality Conditions for the information of an individual offer
The OPTIMAX 2010 NDT processor is a compact desktop microprocessor-controlled processor-controlled processor with an automatic mode of operation, with a capacity of 120 24x30 cm films per hour, designed for photochemical processing of X-ray images up to 35 cm wide.
Processing time (1.5-10 min.) and temperature (26-37°C) are specially adjusted in accordance with the requirements for NDT film. Linear speed 8.4-56 cm/min. Processing time 25-164 s.
The OPTIMAX 2010 NDT processor allows you to independently, using an easy-to-use microprocessor, set the processing time for the image, in combination with the processing programs stored in the machine's memory, allows you to process standard film using any chemicals. The developer and fixer solutions are temperature controlled, circulated and automatically replaced.
The digital display of the machine shows: developer temperature, image processing time, shot counter, error messages, as well as information about filling the developer tank.
A user-friendly control panel makes it easy to select the desired processing speed, temperature, chemical replenishment rate.
Developer and fixer pumps can be manually shut off to save chemicals when processing thin film widths. Due to the small dimensions of 770x590x420 mm, the occupied area of 0.45 m2 can be installed both on the surface of a conventional table and on a stand table.
Manual для OPTIMAX 2010 NDT |
Basic options | |
Film types | листовые / рулонные (по заказу, адаптер) |
Anti-oxidation mode | yes (каждые 60 мин. с возможностью отключения) |
Minimum film width, mm | 100 |
Maximum film width, mm | 350 |
Minimum film length, mm | 100 |
Regeneration rate, ml/m2 | from 150 to 1 485 |
Film definition | 2 микро-сенсора |
Maximum film length, mm | не ограничена |
Anti-crystallization mode | yes (каждые 20 мин.) |
Regeneration time, s | from 10 to 99 |
Performance | |
Time of processing, min. | from 1,5 to 10,0 |
The number of processed films of 24x30 cm in size at 90 seconds processing, sheets/hour | 129 |
The volume of working containers | |
Developer, l | 5,0 |
Fixer, l | 5,0 |
Water, l | 5,0 |
Regeneration tank, l | 12,0 / 25,0 |
Processing options | |
Development temperature, °C | from +26,0 to +37,0 |
Drying temperature, °C | from +20 to +70 |
Power supply | |
AC operation | yes |
Power consumption, W | 1 400,00 |
Standby power consumption, W | 120,00 |
AC power requirements | |
Mains voltage, V | from 220 to 240 |
AC frequency, Hz | 50 / 60 |
Current strength, A | 8,8 |
Environmental protection | |
International protection marking | IP20 |
Dimensions and weight | |
Height, mm | 420,0 |
Width, mm | 590 |
Length, mm | 770 |
Weight, kg | 35,000 |
Required working area, m2 | 0,45 |
Water connection | |
Connection diameter, inches | 3/4 |
Permissible pressure, bar | from 2 to 10 |
Water consumption during operation, l/min | 1,90 |
Standby water consumption, l/min | 0,01 |
Operating conditions | |
Operating temperature range, °C | from +18 to +40 |
Service life and warranty | |
Warranty period, months | 24 |
There are no reviews for this product yet.. Write the first review.