Universal bubble indicator of leaks of gaseous media PPI-1. Corresponds to PNAE G-7-019-89.

Consumption depends on the quality of the prepared control surface and application method, and ranges from 150 to 200 ml/m2. Approximately 8 liters of PPI will be required to control 1 km of seams, provided that the width of the controlled zone is 20 mm in each direction from the middle of the seam.

Application area:

• tightness control of welded and brazed seams and base material;
• tightness control of detachable connections;
• detection of leaks of any gases (including combustible, poisonous, etc.);
• tightness control during the production and operation of structures and systems;
• pre-test before highly sensitive leak test.

Sectors of application:

• nuclear power;
• aviation and astronautics;
• shipbuilding;
• objects of Rostekhnadzor;
• transport;
• domestic gas systems.

Technology:

• apply in a thin even layer;
• observe bubbles;
• rinse with water.

Control methods:

• bubble vacuum;
• pneumatic inflation;
• operational control.

The control process with the PPI-1 foam indicator is characterized by high speed and low cost of operation, which makes it a cost-effective solution for regular monitoring. Thanks to its water base and simple application technology, it is safe to use and does not require complex personnel training. If you need detailed information or advice before how to buy a PPI-1 foam indicator, our specialists are ready to help. Full support is provided for all supplied materials, including foam PP-1. We will arrange prompt delivery throughout Russia.

• Versatility: any gases, any objects.
• High sensitivity.
• High performance.
• Objectivity.
• Ease of use.
• Ensuring the safety of the pneumatic test cycle.
• Does not cause corrosion.

• Foam-film indicator PPI-1 - 1 l (5 l packing is possible or on request)

There are no reviews for this product yet.. Write the first review.